Lucent Technologies GW-DS300N - Manual (Page 38)

2
33
Chapter 2 Basic Installation & Configuration
Session Resumption After reconnecting the signal which broke up, you
can set the session resumption to reduce the
transferring packet to accelerate the speed. There
are five types of session resumption:“Disable”,
“Reauthentication”, “Roaming”, “SameSsid”and“
Always”.
ID These are the Identity and Password for passing
through the server.
Use Client certificate A client certificate is required for TLS, and is
optional for TTLS and PEAP. This forces a client
certificate to be selected from the appropriate
Windows Certificate Store and made available to the
RADIUS server for certification.
Tunneled 1.Protocol ĈWhen the authentication type is PEAP
or TTLS, select a protocol to be used to build the
encrypted tunnel. Under PEAP authentication, you
can choose“EAP-MSCHAP v2”, “EAP-TLS/Smart
Card”, and“Generic Token Card”. Under TTLS
authentication, there are“CHAP”, “MS-CHAP”,
“MS-CHAP-V2”, “PAP”and “EAP-MD5”.
2 . I d e n t i t y ĈThis is the protected user EAP
Identity used for authentication. The identity
specified may contain up to 63 ASCII characters,
is case sensitive and takes the form of a Network
Access Identifier, consisting of <name of the
user>@<user’s home realm>. The user’s home
realm is optional and indicates the routing domain.
Authentication