Phonetics 2000 - Manual (Page 11)

11
Important Safety Instructions
Your CPP Monitor 2000 has been carefully designed to give you
years of safe, reliable performance. As with all electrical equipment,
however, there are a few basic precautions you should take to avoid
hurting yourself or damaging the unit:
Read the installation and operating instructions in this manual
carefully. Be sure to save it for future reference.
Read and follow all warning and instruction labels on the product
itself.
To protect the CPP Monitor 2000 from overheating, make sure all
openings on the unit are not blocked. Do not place on or near a heat
source, such as a radiator or heat register.
Do not use your CPP Monitor 2000 near water, or spill liquid of any
kind into it.
Be certain that your power source matches the rating listed on the
AC power transformer. If you’re not sure of the type of power
supply to your facility, consult your dealer or local power company.
Do not allow anything to rest on the power cord. Do not locate this
product where the cord will be abused by persons walking on it.
Do not overload wall outlets and extension cords, as this can result
in the risk of fire or electric shock.
Never push objects of any kind into this product through ventilation
holes as they may touch dangerous voltage points or short out parts
that could result in a risk of fire or electric shock.
To reduce the risk of electric shock, do not disassemble this
product, but return it to CPP Customer Service, or another
approved repair facility, when any service or repair work is re-
quired. Opening or removing covers may expose you to dangerous
voltages or other risks. Incorrect reassembly can cause electric
shock when the unit is subsequently used.
If anything happens that indicates that your CPP Monitor 2000 is not
working properly or has been damaged, unplug it immediately and
follow the procedures in the manual for having it serviced. Return
the unit for servicing under the following conditions:
1. The power cord or plug is frayed or damaged.
2. Liquid has been spilled into the product or it has been exposed
to water.