Phonetics 2000 - Manual (Page 44)

44
CPP Monitor 2000 User’s Manual
There are 3 tabs on the Inputs form: Status, Alarm Programming,
and Configuration.
Status tab:
The Status tab shows the name, value, units of measure, status,
alarm state, and Min/Max values for all of the inputs.
Listed below is a description of the information found on the Status
tab of the Inputs form:
Input Name:
This field will allow you to type in a 16 character description for
each input.
Value (with units):
This is the real time state or value of each input. If a unit of measure
has been selected for the input, it will also be displayed here. If you
choose Pulse Count or Run Time as your Input Types and double
click on their respective Values, you will pop up a small screen on
which to preset the values for each.
Display range for 0-5V, 4-20mA, and Temperature input types:
-99,999.9 to 99,999.9
Display range for Pulse Count and Run Time: 0 to 999,999. You can