Phonetics 2000 - Manual (Page 41)

41
Chapter 4: Programming
filled in from the information you provided when setting up the unit
on your computer. When CPP Monitor 2000 sends a cover page with
a Fax transmission or alerts an alphanumeric pager, the Unit
Description is sent as part of the basic information.
Clock:
Unit Date & Time
The date and time are automatically programmed into a new unit,
based on your computer’s date and time. This will occur the very
first time you go on-line. If you are in a different time zone you
will need to correct the time accordingly.
Auto Daylight Savings
This instructs CPP Monitor 2000 to automatically correct the time
twice a year for daylight savings.
Programmable settings: On, Off
Default setting: On
Dialout Settings:
Dialing Method
The Dialing Method parameter lets you program whether CPP
Monitor 2000 will dial out in Pulse or Tone. The default setting is
Tone.
Dialing Prefix
The “Dialing prefix” box on the System Settings screen is for email
prefixes only. If for instance the 2000 is on an office phone system
where it had to dial a “9” to get an outside line, entering a “9” here
will force the 2000 to dial “9” before dialing the email server phone
number.
To enter a specific prefix for dialout types other than email, go
instead to the Dialout Destination screen (see “Destinations” section
later in this chapter) and enter the prefix with the phone number in
the Destination column, following the instructions under “Special
Dialing Codes.” You must enter each prefix manually for each
individual phone number that requires one.