Phonetics 2000 - Manual (Page 73)

73
Chapter 4: Programming
unit. If you wish to see the scheduled polls for a given unit you can
select that unit in the combo box on the Polling Summary form.
Settings:
Click this button to set the following Polling options:
Reset Data Log:
If this button is lit, the CPP Monitor 2000’s Data Logger will be reset
(cleared) once the poll is complete.
Note: The CPP Monitor 2000 unit will not automati-
cally delete its Data Log records when they are
downloaded, unless you select this button. Resetting
the Data Logger after polling is useful if you also
intend to print the Data Log records after polling. If
you do not clear the Data Log after a poll, the next
time you poll the unit you will download and print
the same records again.
Enable Polling:
If this button is lit, the current unit will be among the units polled at
the start of every hour. In order for your PC to make the scheduled
Polling phone calls to units, you must enable Polling for each unit
and turn on the master polling control. The master polling control
is enabled by selecting Enable from the Polling menu or by clicking
Polling Mode from the Toolbar.
Note: If you are logged into a unit with the PC,
polling for that hour will not occur until you exit the
unit. Also, it is important to note that if for some
reason you are logged into a unit for an entire hour,
your PC will not make the phone calls for that hour.