Phonetics 2000 - Manual (Page 60)

60
CPP Monitor 2000 User’s Manual
Dial Type:
This is used to specify the type of call CPP Monitor 2000 will make
to a particular destination. The available dialout types are: Fax,
Voice, E-mail, Pager, Alpha Pager, and Modem.
Fax - This instructs CPP Monitor 2000 to send a fax transmission to
either a fax machine or a PC with the ability to receive a fax
directly.
E-mail - This instructs CPP Monitor 2000 to deliver a message to
the E-mail address programmed in the destination field.
NOTE: For “E-Mail” Dial Types, only E-mail
addresses may be programmed in the destination
field, NOT telephone numbers. CPP Monitor 2000 is
pre-programmed with a toll-free 800 number that will
automatically connect to Phonetics’ E-mail server
system. Note: E-mail service requires a subscription
fee.
Numeric Pager - This instructs CPP Monitor 2000 to dial a
numeric pager and leave the unit’s ID number and alarm input
numbers on the display. This will happen automatically just by
entering the pager’s telephone number in the destination field. If
you want to change the information that is sent to your pager or you
are having trouble receiving the page, you may use the special
dialing codes to customize the dialout to your pager.
NOTE: When dialing to a numeric pager it is some-
times necessary to combine codes. Certain pager
systems vary and you must adjust accordingly. To test
your pager system, use an extension telephone on the
same line as the CPP Monitor 2000 unit and listen
in during the CPP Monitor 2000’s dial-out to confirm
that your pager service is reached without a problem.
If you must add a pause, use the letter P to insert a
two second pause wherever necessary.
Alpha Pager - This instructs CPP Monitor 2000 to deliver a text
message to an alphanumeric pager.
Modem - This instructs CPP Monitor 2000 to call a modem
attached to a computer running Manager 2000 software.