Phonetics 2000 - Manual (Page 49)

49
Chapter 4: Programming
Pulse Count and Run Time Accumulator:
N/A
Alarm High Limit:
This is the value which will cause the unit to make alarm dialouts
on an input high condition.
0-5V, 4-20mA, and Temperature:
Programmable range: -99,999.9 to 99,999.9
Default setting: 100
Pulse Count and Run Time Accumulator:
Programmable range: 0 to 999,999
Default setting: 1,000
Recognition Time:
This is the time required for an out of tolerance condition to become
an alarm. The input must remain above or below the alarm limit
continuously for the entire time in order to become an alarm.
0-5V, 4-20mA, and Temperature:
Programmable range: 0 seconds - 270 minutes, Default setting: Inputs 1-
8: 3 seconds
AC Power:
Programmable range: 0 seconds - 270 minutes, Default setting: 5 minutes
Pulse Count and Run Time Accumulator:
N/A
Call List:
Click this button to display the list of destinations the unit will call
to deliver an alarm message for each input. CPP Monitor 2000 will
call the destinations in numerical order. Place a check next to each
destination you want CPP Monitor 2000 to call for an alarm on the
currently selected input.
Default setting: All