Delete input monitors, Bar reading, Low limit – Phonetics 2000 User Manual
Page 51: High limit, Low alarm limit
51
Chapter 4: Programming
Delete Input Monitors
To delete a monitor, select it by clicking on it. Next, choose
File>Delete from the Monitor menu.
There are 3 types of input monitors: Bar, Gauge, and Contact
Status. Below is a view of each and an explanation of its features.
bar monitor
Bar Reading:
This is the real-time value of the input. This number is white if the
input status is OK, but will change to red if the input goes above or
below the programmed alarm limits.
Low Limit:
The lowest possible reading of the monitor. This is taken from the
Table Low field on the Configuration tab of the Inputs form.
High Limit:
The highest possible reading of the monitor. This is taken from the
Table High field on the Configuration tab of the Inputs form.
Low Alarm Limit:
(lower red zone) The low alarm limit for this input. This is taken
from the Low Limit field on the Alarm Programming tab of the
Inputs form.