Phonetics 2000 - Manual (Page 55)

55
Chapter 4: Programming
Destination:
The actual telephone number or E-mail address CPP Monitor 2000
dials to deliver its report or alarm message. The Destination field
can be up to 64 characters long for E-mail addresses and 32 digits
for all other Dial Types and may consist of numbers, letters, and
special dialing codes.
Numeric Pagers
The CPP Monitor 2000 can send alarm messages to numeric pagers.
It will automatically send its telephone number and the alarm input
number when dialing to a numeric pager. All you have to do is
enter the telephone number of your pager.
Example: (310)565-2300
Note: If your pager service is answered by a voice-
prompted message you will need to enter additional
programming. See the Special Dialing codes section
below.
Alphanumeric Pagers
The CPP Monitor 2000 can dial alphanumeric pagers to send alarm
messages. The CPP Monitor 2000 will send the unit description,
telephone number, input name and input value. To program an
alphanumeric pager destination, enter the phone number followed
by the letter A and then the pager ID.
Example: 1-610-555-4593 A 0504099
E-mail
The CPP Monitor 2000 can send alarm messages and reports via E-
mail. For this to work you must have an internet E-mail account
and register the unit with Crucial Power. The unit will automatically
dial a toll-free number to the E-mail server at Phonetics and then
forward the information to you. A monthly fee is required to
receive E-mail from your CPP Monitor Simply fill out the E-mail
registration card that came with your unit, or contact Phonetics for
more details. In the “Destination” field, enter the E-mail address.
Example: [email protected]