Panasonic WR-DA7 - Manual (Page 112)

C h a p t e r 7
D A 7 U s e r s ’ G u i d e 7 - 3
7
Equalizer
7-2 EQUALIZER Section
The primary settings for the equalizer can be accessed on the Top Panel
while the LCD screen continues to display the
[CHANNEL] window.
Although this [CHANNEL] window functionality is convenient when you are
making general equalizer adjustments, to aid you in understanding the
following information, please follow these steps to access and activate the
controls in the
EQUALIZER section:
Press the knob in the EQUALIZER section to display the
[EQUALIZER] window. Or, cursor to the [EQUALIZER] area in the
[CHANNEL] window, and press the ENTER button to display the
[EQUALIZER] window. Or, when the [AUTO DISP CHANGE] selection
in the
[UTILITY>CONFIG] window is , press an LED button or adjust
a knob in the EQUALIZER section to automatically display the
[EQUALIZER] window.
Press a SELECT button to select the channel you want to adjust.
Turn the equalizer on by pressing the EQ ON LED button on the Top
Panel, or cursor to the [EQ] area button, and press the ENTER
button.
Select a band to adjust by pressing one of the frequency band LED
buttons,
H, HM, LM, or L.
Adjust EQ parameters by turning the Q, FREQ, and GAIN knobs, or
cursor to a soft knob, and adjust with the JogDial. The EQ characteristics
are displayed on the graph in the [EQUALIZER] window, and are also
displayed in the [EQUALIZER] area of the [CHANNEL] window.
OFF
ON
EQUALIZER Section
Q (quality) knob/Left
surround parameter
FREQ (frequency) knob/
Surround sound rear left
parameter
GAIN knob/ Surround
sound subwoofer
parameter
Frequency range LED
buttons
EQ ON LED button
5
4
1
3
2