Selection cursor, Registration marks, Creating a fader group – Panasonic WR-DA7 User Manual
Page 196
Selection Cursor
Pressing the
CURSOR MODE button displays the
in the lower right
corner of the LCD screen. In this
cursor mode, the
JogDial performs as
group selection that moves the cursor from group to group. The
disappears by pressing the
CURSOR MODE button again. Rotating the
JogDial moves the cursor from mark to mark in a selected group.
For grouping operations, switch the
JogDial to the cursor mode and scroll to
select the group. Then switch the
JogDial to the none-cursor mode and scroll
to select the marker in a group, and press the
ENTER button.
Registration Marks
The status of a channel is indicated in the columns of the tables in the
window:
shows a registered channel, and
shows an unregistered
channel.
A channel cannot be registered to multiple groups. When a channel is
assigned to a group, any previous assignment for it is cancelled automatically.
Creating a Fader Group
There are two methods for assigning a channel to a fader group while the
[FADER GRP] window is displayed.
Pressing a channel
SELECT LED button on the Top Panel to select the
channel (orange) will add the channel to the current fader group. If the
group selection marker is not positioned within the table which
includes the selected channel, the marker shifts to the relevant table
automatically. A registration mark will be displayed in the
[FADER GRP]
window table, denoting the channel selection for the respective group.
Pressing the
ENTER button in the cursor mode while the cursor is
positioned on the desired channel number will register the channel to
the current fader group. A registration mark will be displayed denoting
the channel selection for the current group.
C h a p t e r 1 3
D A 7 U s e r s ’ G u i d e
13
-
4
13
Group
Once the groups have been activated in the
[FADER GRP]
window, the window does not have to be displayed when you
want to register a group. Use the fader group selection buttons in
the
[CHANNEL] window to register the channel to a group.
■
■
To cancel all the channels assigned to a group, press one of the
SELECT buttons in the group for 2 seconds or more.