Setting of bulk command reception, Data transmission request and transmission, Receiving/sending data – Panasonic WR-DA7 User Manual
Page 167
C h a p t e r 1 1
D A 7 U s e r s ’ G u i d e
11
-
1 3
11
MIDI
Setting of Bulk Command Reception
Switch the setting
or
to receive a bulk data or bulk out transmission
request from outside by pressing the
ENTER button.
You can choose whether or not to ignore a request made by other devices.
Cursor to
[Rx], and press the ENTER button. Each time the button is pressed,
and toggles.
Data Transmission Request and Transmission
Press the
button to request transmission of selected data from
another DA7, and load the data. To cancel the operation, cursor to the
button and press the
ENTER button. When the operation is completed, the
indication of "during execution" disappears and the
button appears
as inverse video.
Press the
button to transmit selected data to a device.
To cancel the transmission, cursor to the
button and press the
ENTER
button. When the transmission is completed, the indication of "during
execution" disappears and the
button appears as inverse video.
Receiving/Sending Data
Display the
[MIDI>BULK] window.
Press the
MIDI button to display the [BULK] window.
Cursor to the desired data type using the
ARROW buttons, and press the
ENTER button. The selected button is shown as inverse video.
Press the
ARROW button to move the cursor to the right. Rotate the
JogDial to display the desired data name, and press the ENTER button.
To receive or send data collectively, cursor to the
button, and
press the
ENTER button. This setting permits simultaneous sending or
receiving of the nine kinds of data shown on the window.
To receive data from another DA7, cursor to the
button. To
send data from the DA7, cursor to the
button.
Press the
ENTER button to receive or send data.
If the
button is pressed, the DA7 sends a request message for
MIDI bulk dump to the device, which sends the requested data to the
DA7. Then operate the device to send data, if any device other than
another DA7 is connected.
Or,
If the
button is pressed, the DA7 sends the data specified by
the above operation to the device.
OFF
ON
OFF
ON
1
2
3
4
5
6
7
8