Panasonic WR-DA7 - Manual (Page 128)

Button
Use this button to delete the most recent control point created in
mode, which will delete the whole line.
JogDial
Adjust sound location by turning or rotating the JogDial.
[MOVE] Area
Button
When Return is on, appearing as inverse video, the cursor movement
repeats from the starting point —>to the end point —>to the starting
point —>. When Return is off, it simply moves the cursor from the
starting point —>to the end point.
Button
This button moves the source location cursor from the starting point —> to
the end point and the end point —>to the starting point when off.
When on, it will repeat the movement continuously.
Button
When on, reverse will move the source location cursor in the opposite
direction, from the end point —>to the starting point. When Reverse is
off, the cursor moves in a normal or clockwise direction.
[AUTO MOVE] Area
Here you can program the duration of an automatic move of the source/
location. Use the
JogDial to select a duration for the move from 0.0 sec to
30.0 sec. The function will begin when the button is pressed. This
mode follows the same conditions as in the [MOVE] area. The cursor will
move, in the time set, from the starting point to the end point (or, the end
point to the starting point when in reverse).
Pressing a second time stops the movement. The knob-adjusted data
will be recorded automatically when adjusting during automation [REC
MODE]. This action can be reset repeatedly by going back into [REC MODE]
and redoing the automation mix for the effect.
C h a p t e r 8
D A 7 U s e r s ’ G u i d e 8 - 9
8
Pan/Assign
Surround