Gate operations – Panasonic WR-DA7 User Manual
Page 144
Gate Operations
Set the status the same way you selected
mode in the
[DYNAMICS] window.
Cursor to
[ATK], [THL] or [RELEASE] in the [GATE] area, and adjust
the parameter using the
JogDial. The adjusted parameter is graphically
displayed on the screen. When a signal is input, gain reduction for the
input signal is indicated in the
[GR] meter.
Expander Operations
Cursor to the
button in the
[FUNCTION] area, and press the
ENTER button to engage the expander.
When the
button is pressed, the
is disabled.
Select a parameter you want to adjust by operating the cursor on the
screen or the
PARAMETER SELECT button on the Top Panel.
Adjust the parameter by rotating the
JogDial, or use the
knob for
threshold, attack, and delay, and the
knob for ratio, release, and
range. The parameter title will be indicated in reverse video.
The adjusted parameter is graphically displayed on the screen. When a
signal is input, gain reduction for the input signal is indicated in the
[GR] meter, and the reference point of the [GR] meter is highlighted.
Delay Operations
Press the
DELAY ON LED button (green) on the Top Panel or the
DELAY ON button in the [DYNAMICS] window to activate the delay
function.
Move the cursor on the screen, or press the
PARAMETER SELECT
button to select the
[DLY] parameter.
Adjust the parameter by using the
JogDial or the
knob. The
parameter title will then be indicated in reverse video.
C h a p t e r 9
D A 7 U s e r s ’ G u i d e
9
-
1 2
9
Dynamics/
Delay
5
1
2
3
2
3
4
1
1
2