Panasonic WR-DA7 - Manual (Page 123)

Button
The surround sound function can be turned on from both the
[PAN/SURROUND>SURROUND] window or the assign switch on the
[CHANNEL] window. Move the cursor to the
button, and press the
ENTER button. The button appears as inverse video when engaged, and the
data field below it changes from
to .
[LR:C] Field
This field sets the ratio of the left or right output level versus the center
output level. Select the
[LR:C] field with the cursor, and use the JogDial to
change the values from 0:10 to 10:0.
The value of 0:10 will create a “center emphasis” pan, whereas a value of
10:0 will have no “centering” effect.
C h a p t e r 8
D A 7 U s e r s ’ G u i d e 8 - 4
8
Pan/Assign
Surround
To monitor surround sound, turn ON and assign the buses as
surround sound in the
[SURROUND MONITOR] area of the
[SOLO/MONITOR] window.
See page 16-3, [SURROUND MONITOR] area for more details.
To control the [MASTER LEVEL] of the surround sound, rotate
the Level ON/OFF knob in the AUX section, while the
[SURROUND] window appears on the LCD.
See page 16-3, [SURROUND MONITOR] area for more details.