Panasonic WR-DA7 - Manual (Page 206)

[OFFSET] Area
To offset the timecode, cursor to the [OFFSET] area, and use the JogDial to
change the values in hours, minutes, seconds, and frames. This feature allows
you to synchronize an automation mix with its own timecode to an external
source (such as a video tape) that has a different timecode. Remember that
these two timecodes should always be the same frame rate.
[CURRENT] Area
This area shows the number of events used in the current automation mix.
The DA7 has a 32,000 event capacity which is shared between the current
memories, the undo buffer, and the four event memories, as seen in the
[AUTOMATION>SETUP] window.
[MEMORY] Area
This area displays the available percentage of memory and number of events
available for use in a mix.
There is also a field that shows the [UNDO] buffer size as a percentage and
as the number of events that have been used.
When running out of memory for AUTOMATION recording, a warning
message appears. Press the [ENTER] button to stop recording.
C h a p t e r 1 4
D A 7 U s e r s ’ G u i d e 14 - 6
14
Automation
OFFSET Area
CURRENT Area
MEMORY Area