Panasonic WR-DA7 - Manual (Page 215)

C h a p t e r 1 4
D A 7 U s e r s ’ G u i d e 14 - 1 5
14
Automation
[OFFLINE EDIT PARAMETER] Area
Select the parameters to be edited in this area of the window. The parameters
are , , , , , ,
, and
. Using the button, you can edit parameters for Dynamics
on/off, Protect Channel and Beat Change.
To edit all parameters, cursor to the button, and press the ENTER
button. To remove all the parameters as a group, cursor to the
button, and press the
ENTER button. To edit individual parameters, cursor to
the parameter (or parameters) you wish to edit, and press the SELECT LED
button.
There is a unique way to search the event list. Since the event list has an
entry for EVERY individual event, it can be very long for a particularly
complicated mix. Every item is listed by the time of the event. However, if
you decided to look through and change the EQ on for a particular channel,
it would be tedious to have to go through all of the events to find what you
were looking for.
So, we have provided a way to narrow down the search for the type of event
you are looking for. While displaying the
[EVT EDIT] window, turn off the
parameters that you wish to ignore, and the list will only show the event
types you want to see. It will not delete them from the list, and you can turn
them back on at any time.
You can also select which CHANNELS are listed. This can be a helpful if you
are only looking for the events listed for one particular channel. Cursor to the
[EDIT CHANNEL SELECT] area, and select the channels you wish to view.
OFFLINE EDIT PARAMETER Area