Panasonic WR-DA7 - Manual (Page 213)

[AUTO PUNCH IN]
When engaged, [AUTO PUNCH IN] appears as inverse video.
Once you select the channel and parameter you wish to adjust (if
[AUTO PUNCH IN] is engaged and the automation is record
ready), moving the fader or knob of a selected channel, while
playing back a mix, will cause the DA7's automation to go into
record for that channel or channels.
To stop the DA7 from recording, or to “punch-out”, press the
ARROW
button on the MMC control. You can also “punch-
out” by turning SELECT off for the channel you wish to stop
updating.
STOP
C h a p t e r 1 4
D A 7 U s e r s ’ G u i d e 14 - 1 3
14
Automation
Pressing the SHIFT (#0) button and the SELECT LED button of
the channel simultaneously lets you select the channel for
[EQUALIZER] or [DYNAMICS/DELAY].
If you want to view the AUX SEND status on the LED field while
AUTOMATION is [ENABLE] and [MMC] is active, simultaneously
press the
SHIFT key of the Keypad and the AUTOMATION/AUX
LED button. This will only change the LED display, and will not
interrupt the
AUTOMATION operation. See page 14-5,
AUTOMATION, EXECUTE Window, for more information.
Pressing the AUTOMATION/AUX button on the top panel of the
DA7 to select automation acts as a shortcut to the RECORD
button in the AUTOMATION EXECUTE screen. See page 14-5,
Automation, Execute Window, for more information.