Psion Teklogix Schnellstart- Anleitung 7525 - Manual (Page 118)

Chapter 6: Settings
Scancode Remapping
88 Psion Teklogix WORKABOUT PRO With Windows Mobile 2003 SE User Manual
Adding A Remap
To add a new remapping:
• Tap the Add button at the bottom of the dialog box.
The Remap Scancode dialog box is displayed.
Figure 6.9 Remapping A Key
• Type the scan code in hexidecimal in the field labelled Scancode.
Note: The ‘Label’ field displays the default function of the scancode you are
remapping.
Virtual Key, Function And Macro
The radio buttons at the bottom of the dialog box allow you to define to what the
scan code will be remapped: Virtual Key, Function or Macro.
When Virtual Key is selected, you can choose to force <SHIFT> to be on or off
when the virtual key is sent. If No Force is selected, the shift state is dependent on
whether the shift state is on or off at the time the virtual key is sent.
When Function is selected, a list of valid functions appears in the dialog box.
When Macro is selected, the macro keys available on your unit are listed in the
dialog box.
• Choose Virtual Key, Function or Macro.
• Choose a function from the Function list, and tap on OK.