Psion Teklogix Schnellstart- Anleitung 7525 - Manual (Page 156)

Chapter 6: Settings
Discrete 2 of 5
126 Psion Teklogix WORKABOUT PRO With Windows Mobile 2003 SE User Manual
6.20.1.14 Discrete 2 of 5
Enabled
Set this parameter to on to enable “Discrete 2 of 5”.
Set Length L1 And Set Length L2
Lengths for “Discrete 2 of 5” can be set for Any length, Length within a range, One
discrete length or Two discrete lengths. The length of a code refers to the number of
characters (i.e., human readable characters), including check digit(s).
Double-tapping on this parameter displays a dialog box labelled Set Code Lengths
where you can define the code length that will be recognized by your scanner.
Choosing One discrete length allows you to decode only those codes containing a
selected length. Choosing Two discrete lengths allows you to decode only those
codes containing two selected lengths. Length within a range allows you to decode
a code type within a specified range from 1 to 12.
Field Size/Char
Refer to page 117 for details.
6.20.1.15 2D PDF-417
(not supported)
Enable
Setting this parameter to
on
enables PDF-417 two dimensional (2D) coding.
Field Size/Char
Refer to page 117 for details.
6.20.1.16 2D Micro PDF-417
(not supported)
Enable
Setting this parameter to on enables “2D Micro PDF-417” bar code scanning. Micro
PDF-417 is a multi-row symbology that is useful for applications requiring greater
area efficiency but lower data capacity than PDF-417.
Code 128 Emulation
When this parameter is enabled, the scanner transmits data from certain Micro
PDF-417 symbols as if it was encoded in Code 128 symbols.