Psion Teklogix Schnellstart- Anleitung 7525 - Manual (Page 46)

Chapter 2: Basic Checkout
Turning The WORKABOUT PRO On and Off
16 Psion Teklogix WORKABOUT PRO With Windows Mobile 2003 SE User Manual
Important: If you are powering up a new unit, a warning message may
appear on the screen indicating that the backup battery capacity is
low. To recharge the internal battery, you must fully charge the
WORKABOUT PRO with the main battery installed in the unit.
An overnight charge is recommended.
2.2 Turning The WORKABOUT PRO On and Off
2.2.1 Installing The Battery And Switching The Unit On
• Turn the fasteners at the base of the battery cover counter-clockwise to
unlock the cover and remove it. The top of the stylus is slot-shaped to help
you loosen the fasteners.
• Slide the charged battery into the unit. Replace the battery cover, and turn the
fasteners at the base of the battery cover clockwise to lock the battery in place.
Note: If you are using a docking station or an external power supply, you can
insert an uncharged battery, dock the unit and switch it on.
To switch on the WORKABOUT PRO:
• Press and hold down the <ENTER/ON> key for at least one second.
• When the LED flashes green, release the <ENTER/ON> button.
The desktop Today screen is displayed.
Note: If the unit was already in use
– the unit may be off (suspend state) – press-
ing <ENTER/ON> ‘wakes’ the unit from this state. The screen in which
you were working prior to the suspend state is displayed.
2.2.2 Switching The Unit Off (Suspend)
• Press the <BLUE> key, and then press <ENTER/ON> to switch off the
WORKABOUT PRO.
2.3 The Companion CD
Your WORKABOUT PRO is shipped with a Companion CD that runs automatically
when inserted, providing applications along with helpful information about your
hand-held and its operating system–Windows Mobile 2003 SE.
Note: If at any point while working with the CD, you are asked, “Do you want
to run or save this file”, do not to click the <Save> button.
Start Here–walks you through installing Outlook 2002 along with ActiveSync.
Before you begin the installation process, make certain that you carefully review
the installation notes.