Psion Teklogix Schnellstart- Anleitung 7525 - Manual (Page 150)

Chapter 6: Settings
UPC A
120 Psion Teklogix WORKABOUT PRO With Windows Mobile 2003 SE User Manual
Prefix/Suffix
Refer to page 119 for details.
6.20.1.7 UPC A
Enabled
Set this parameter to on to enable “UPC A”.
UPC-A, Check Digit
If you enable this parameter, the check digit is included with the decoded bar
code data.
UPC-A, Preamble
When you double-tap on this parameter, a dialog box is displayed where you can
choose one of three options for lead-in characters for UPC-A symbols transmitted to
the host device: System Char – system character transmitted with the data, Country
code and System Char – both the country code (“0” for USA) and system character
are transmitted with the data or None – no preamble is transmitted. The lead-in
characters are considered part of the symbol.
Prefix/Suffix
Refer to page 119 for details.
6.20.1.8 UPC E
Enabled UPC-E
Set this parameter to on to allow “UPC E” bar code scans.
Enabled UPC-E1
Set this parameter to on to allow “UPC-E1” (zero suppressed) bar code scans.
UPC-E And UPC-E1 Check Digit
If you enable one or both of these parameters, a check digit is included with the
decoded bar code data.