Psion Teklogix Schnellstart- Anleitung 7525 - Manual (Page 291)

Psion Teklogix WORKABOUT PRO With Windows Mobile 2003 SE User Manual 261
Chapter 8: Expansion Modules
Expansion Modules
8.1 Expansion Modules
Easily installed expansion modules available for the WORKABOUT PRO allow
you to customise this hand-held to meet your specific mobile computing
requirements. This chapter outlines how to install the following expansion modules:
PCMCIA, GSM/GPRS, SE 1223HP and SE 923HP scanner.
8.1.1 Removing The End-Cap And Back Plate
Warning: The installation of this PC Card Expansion Module must be per-
formed using the appropriate anti-static devices. If unavailable,
discharge static from your body by touching a grounded metallic
object before opening any covers on the unit.
To install a module, you’ll need to remove the end-cap and back plate on the
WORKABOUT PRO. This is a simple process of unfastening four screws on the
end-cap and six screws on the back plate.
Figure 8.1 Disassembling The WORKABOUT PRO
Back plate End-cap
SW1401
Power Switch
Battery Cover