Psion Teklogix Schnellstart- Anleitung 7525 - Manual (Page 171)

Psion Teklogix WORKABOUT PRO With Windows Mobile 2003 SE User Manual 141
Chapter 6: Settings
Wireless WAN
Input
This value is compared with the decoded bar code reading. If there is a match, the
“Output” string is translated into the decoded bar code.
Output
If there is a match between the decoded bar code and the corresponding “Input”
string, the decoded bar code will be translated into the “Output” string. This string
entry parameter can be null, or it may contain any combination of standard and
special characters (e.g., function keys, <ENTER>, etc.).
Type
The value chosen from this drop-down menu determines what is compared with
the decoded bar code reading – the beginning of decoded bar code, the end of
decoded bar code, the entire decoded bar code or anywhere within the decoded bar
code (default).
6.21 Wireless WAN
A WORKABOUT PRO equipped with a GSM/GPRS or CDMA/1xRTT radio
provides wide area networking capabilities.
6.21.1 Taskbar Icons
Wireless WAN icons in the taskbar indicate the status of your wide area network
connection. Note that these icons are only visible when a GSM/GPRS or
CDMA/1xRTT radio is installed in the unit, and the interface is enabled.
The letter in the signal strength icon (G for GSM/GPRS and X for CDMA/1xRTT)
indicates that a packet data service is available and initialized. Keep in mind that the
signal strength icon is displayed without a letter if packet data service is not
available or if it is available but not yet initialized.
User interaction is required (e.g. the user is required to enter a PIN).
A non-recoverable (fatal) error has occurred.