12 the sd/mmc card-adding memory, 1 inserting the card, 12 the sd/mmc card—adding memory – Psion Teklogix Schnellstart- Anleitung 7525 User Manual

Page 71

Advertising
background image

Psion Teklogix WORKABOUT PRO With Windows Mobile 2003 SE User Manual

41

Chapter 3: Getting To Know The WORKABOUT PRO

The SD/MMC Card—Adding Memory

3.12 The SD/MMC Card—Adding Memory

To add additional non-volatile memory to your hand-held, you can insert a Secure
Digital/Multi-Media Card (SD/MMC) through the battery compartment.

3.12.1 Inserting The Card

Remove the battery cover and the battery.

A hinged door at the top of the battery compartment protects the connectors.

Figure 3.12 Inserting the SD/MMC Card

Lift the hinged SD door by gently pulling upward on the metal tab.

Orient the SD/MMC card according to the legend stamped into the battery
well plastic.

Place the card in the slot with the card contacts down, and slide it inward
until it latches into place.

Swing the hinged door back into place.

To remove the card:

Gently press it inward slightly until the detent unlatches, and the card is
expelled from the slot.

Hinged SD door

SD/MMC

Card

Advertising