Panasonic WJ-NT104 - Manual (Page 13)

13
●
PC Setup
The factory default settings of the WJ-NT104 are as fol-
lows:
IP address
Netmask
Default gateway
192.168.0.10
255.255.255.0
192.168.0.1
For a client PC to access WJ-NT104 factory default set-
tings, set the IP address of the PC to 192.168.0.XX (XX
means any number from 2 to 254 except 10).
q Connect the WJ-NT104 to the PC. (See page 12.)
w Change the PC’s TCP/IP to match the factory default
settings of the WJ-NT104.
If your PC's OS is Windows95 or Windows98, proceed
as follows:
(1) Click the Start button, point to settings , and then
click Control Panel .
(2) Double-click Network .
(3) In the Network dialog box, click the Configuration
tab.
(4) Choose TCP/IP , and then click the [Properties]
button to display the TCP/IP Properties dialog
box.
(5) Specify an IP address as follows:
IP Address: 192.168.0.9
Subnet Mask: 255.255.255.0
e Restart the PC.
Start the WWW browser, and select [Do not use proxy
for address 192.168.0.10] .