Panasonic WJ-NT104 - Manual (Page 64)

64
LINK RCV XMT
OPERATE
Network Interface Unit WJ-NT104
R A M
PUSH OPEN PUSH OPEN
AV Disc Recorder WJ-DR
REMOTE
OPERATE
ALARM
RESET
REC DISC
ALARM REC
DISC CONTROL
DR
PC
DR
PC
DR
PC
WJ-DR200 WJ-NT104 (VIDEO IN 1) CAMERA 1
CAMERA 2
(VIDEO OUT)
■ WJ-DR200 AV Disk Recorder Control
● Connections
• Fixed Input Selection Mode
(1) Connect CAMERA 1 and 2 to the VIDEO IN A and B connectors on the rear of the WJ-DR200.
(2) Connect the VIDEO OUT connector on the rear of the WJ-DR200 to the VIDEO IN 1 connector on the rear of the WJ-
NT104.
• Random Input Selection Mode
(1) Connect CAMERA 1 and 2 to the VIDEO IN 1 and 2 connectors on the rear of the WJ-NT104.
(2) Connect the VIDEO OUT 1 and 2 connectors on the rear of the WJ-NT104 to the VIDEO IN A and B connectors of the
WJ-DR200.
(3) Connect the VIDEO OUT connector of the WJ-DR200 to the VIDEO IN 3 connector of the WJ-NT104.
(4) Connect the RS-232C ports (of WJ-DR200 and WJ-NT104) with a RS-232C cable.
• For VIDEO INPUT SELECTION
MODE under OPERATION MODE
SELECT, mark RANDOM INPUT
SELECTION MODE.
• Enables control of cameras con-
nected to the VIDEO IN connector
of the WJ-NT104 (requires cus-
tomizing the WJ-DR200 OPERA-
TION VIEW window).
• Unless a user changes channels,
the last selected channel is used to
continue transmission.
• Multi Input Selection Mode
(1) Connect CAMERA 1 and 2 to the VIDEO IN 1 and 2 connectors on the rear of the WJ-NT104.
(2) Connect the VIDEO OUT 1 and 2 connectors on the rear of the WJ-NT104 to the VIDEO IN A and B connectors of the
WJ-DR200.
(3) Connect the VIDEO OUT connector of the WJ-DR200 to the VIDEO IN 3 connector of the WJ-NT104.
(4) Connect the RS-232C ports (of WJ-DR200 and WJ-NT104) with a RS-232C cable.
• For VIDEO INPUT SELECTION MODE under OPERATION MODE SELECT, mark MULTI INPUT SELECTION MODE.
• Enables control of cameras con-
nected to the VIDEO IN connector
of the WJ-NT104 (requires cus-
tomizing the WJ-DR200 OPERA-
TION VIEW window).
• This mode switches periodically
between multiple channels at high
speed so that transmission to two or
more users requesting different
channels is possible.
LINK RCV XMT OPERATE
Network Interface Unit WJ-NT104
R A M
PUSH OPEN PUSH OPEN
AV Disc Recorder WJ-DR
REMOTE
OPERATE
ALARM
RESET
REC DISC
ALARM REC
DISC CONTROL
PC
PC
PC
WJ-DR200
WJ-NT104
CAMERA 1
CAMERA 2
CAM1
CAM2
DR200
(VIDEO OUT)
LINK RCV XMT
OPERATE
Network Interface Unit WJ-NT104
R A M
PUSH OPEN PUSH OPEN
AV Disc Recorder WJ-DR
REMOTE
OPERATE
ALARM
RESET
REC DISC
ALARM REC
DISC CONTROL
PC
PC
PC WJ-DR200
WJ-NT104
CAMERA 1
CAMERA 2
CAM1
CAM1
CAM1
(VIDEO OUT)
RS-232C
DB25 DB9
2 ...................... 2
3 ...................... 3
6 ...................... 4
7 ...................... 5
20 .................... 6
5 ...................... 7
4 ...................... 8
(3) Connect the RS-232C ports (of WJ-DR200 and
WJ-NT104) with a RS-232C cable.
• Only the images from the VIDEO OUT connector
on the rear of the AV Disc Recorder are avail-
able.