Panasonic WJ-NT104 - Manual (Page 70)

70
• Multi input selection mode
Enables control of cameras connected to the VIDEO IN connector of the WJ-NT104.
For VIDEO INPUT SELECTION MODE under OPERATION MODE SELECT, mark MULTI INPUT SELECTION MODE.
This mode switches periodically between multiple channels at high speed so that transmission to two or more users
requesting different channel is possible.
(1) Connect CAMERA 2 and 3 to the VIDEO IN 2 and 3 connectors on the rear of the WJ-NT104.
(2) Connect the VIDEO OUT 2 and 3 connectors on the rear of the WJ-NT104 to the VIDEO IN 2 and 3 connector of the
disk recorder.
(3) Connect MULTISCREEN OUT of the disk recorder to the VIDEO IN 1 connector of the WJ-NT104
(4) Connect the RS-232C ports (of the disk recorder and the WJ-NT104) with a RS-232C cable.
LINK RCV XMT
OPERATE
Network Interface Unit WJ-NT104
PC
PC
PC
WJ-HD500
WJ-NT104
CAMERA 2
CAMERA 3
CAM2
CAM3
HD500
(MULTISCREEN OUT)
REMOTE
TIMER
OPERATE
FULL
HDD SEQUENCE
SET LOCK ALARM
ALARM
RESET
ALARM SUSPEND MULTISCREEN SELECT
SETUP /ESC
GROUP
SELECT
SPOT
MULTISCREEN
DAYLIGHT SAVINGS
EL-ZOOM
COPY
REC PREVIEW INDEX
STOP BPLAY/ PAUSE REC
FWD REV
ALARM SEARCH
DISPLAY
REC STOP 1 2 3 4
13 14 15 16
9 10 11 12
5 6 7 8
Digital Disk Recorder
WJ-HD
FS 16 16
● Setup
In the SERIAL PORT SETUP window, set TYPE under RS-232C to “Serial through”. Set the same communication parame-
ters as for the WJ-HD500 disk recorder.
● Control Operation
Type the URL http://192.168.0.10/hd5index.html to access the WJ-HD500 CONTROL window for the disk recorder.
w
q
e
r
t
y
u
i
o
!0
!1
!2
!4 !5 !6 !7
!3
@8 @7 @6
!8
!9
@0
@1
@2
@3
@4
@5