Panasonic WJ-NT104 - Manual (Page 44)

44
u
■ ALARM SETUP
On the ADMINISTRATOR SETUP PAGE , click the ALARM button to display the ALARM SETUP window.
q ALARM RECORDING/LOG
Set the alarm recording function to ON or OFF .
w ALARM RECORDING MODE
Select on alarm image recording mode.
e OVERWRITE
When YES is marked, old alarm images are overwritten
by new alarm images.
When
NO is marked, new alarm images received after
the limit for recording of alarm images has been
reached will not be recorded.
r NUMBER OF RECORDING FRAMES
Set a number of images to be recorded before and
after an alarm is activated.
Note: Depending on the recording mode, this item is
not shown on the window.
t FRAME RATE OF RECORDING FRAME
Set a frame rate range for recording before and after
an alarm is activated.
Note: Depending on the recording mode, this item is
not shown on the window.
y ALARM CLEAR
Clicking this button clears the alarm images and alarm
log file saved in the memory.
u PARALLEL I/O PORT
Designate the Alarm Input/Output Port (Parallel I/O
port). The factory default setting is INPUT.
Port number 8 can also be used for time adjustment. If
a contact input is received within plus or minus 3 min-
utes of the hour, the internal clock is set to the hour.
q
w
e
r
t
y