Panasonic WJ-NT104 - Manual (Page 67)

67
■ WJ-HD100 Digital Disk Recorder Control
It is enabled control of the WJ-HD100 disk recorder from the PC via the WJ-NT104 Network Interface Unit. (disabled control
with PSoData)
Also refer to the operating instructions for the disk recorder together.
● Connections
• Fixed input selection mode
In this mode, only images from the MONITOR OUT connector of the disk recorder are available.
(1) Connect MONITOR OUT of the disk recorder to VIDEO IN 1 on the rear of the WJ-NT104.
(2) Connect the RS-232C ports (of the disk recorder and the WJ-NT104) with a RS-232C cable.
LINK RCV XMT
OPERATE
Network Interface Unit WJ-NT104
HD
HD
HD
HD
PC
PC
PC
PC
WJ-NT104 (VIDEO IN1)
WJ-HD100
(MONITOR OUT)
OPERATE
TIMER HDD
ALARM SUSPEND
DAYLIGHT SAVINGS
FULL
LOCK
MEMORY CARD DISPLAY SELECT STOP PLAY REC
PUSH– PAUSE SET
ALARM SEARCH STEP REW/FF PLAY MODE SELECT
/ /
/ /
SETUP/ESC
LCD CONTRAST
Digital Disk Recorder WJ-HD
RS-232C
DB9 DB9
2 ......................... 3
3 ......................... 2
4 ......................... 6
5 ......................... 5
6 ......................... 4
7 ......................... 8
8 ......................... 7
● Setup
In the SERIAL PORT SETUP window, set TYPE under RS-232C to “Serial through”. Set the same communication parame-
ters as for the WJ-HD100 disk recorder.
In the MODE SETUP window, for VIDEO INPUT SELECTION MODE under OPERATION MODE SELECT, mark FIXED
INPUT SELECTION MODE.
● Control Operation
Type the URL http://192.168.0.10/hd1index.html to access the WJ-HD100 CONTROL window for the disk recorder.
q
w
e
!5
r
!6
!7
!8
!9
@0
@1
@2
@4
t
y
o
u
i
!1
!3
!2
@3 @2
!0