Panasonic WJ-NT104 - Manual (Page 17)

17
e On the ADMINISTRATOR SETUP PAGE , click the [MODEM] button to open the MODEM/TA SETUP dialog box.
Make the necessary entries for MODEM MODELS, MODEM INITIALIZE COMMAND (specify directly), LINE TYPE,
LOCAL TELEPHONE NUMBER, DESTINATION TELEPHONE NUMBER, LOGON ID, LOGON PASSWORD and REDIAL
(NUMBER OF TIMES/INTERVAL) .
r Click the [SET] button to save.
t On the ADMINISTRATOR SETUP PAGE , click the [NETWORK] button to open the NETWORK SETUP dialog box. For
NETWORK TYPE , mark PPP .
y Click the [SET & REBOOT] button to save.
The WJ-NT104 is switched from LAN connection mode to PPP connection mode.
u Connect the RS-232C port on the rear panel of the WJ-NT104 to the RS-232C port on the modem/TA with a RS-232C
cable, and access the WJ-NT104 from a client PC via the modem/TA.