Panasonic WJ-NT104 - Manual (Page 15)

15
● IP Address Setting via LAN Connection
q On the Location bar, enter http://192.168.0.10/hwset-
up.html to display the ADMINISTRATOR SETUP
PAGE .
To open the ADMINISTRATOR SETUP PAGE , you
need to enter your user ID and password. The default
ID and password are [admin] and [nil], respectively.
Click the
[NETWORK] button to display the NETWORK
SETUP dialog box.
w Set IP-ADDRESS, NETMASK, DEFAULT GATEWAY .
Consult your network administrator for the correct set-
tings.
e Specify the TCP/IP settings for the PC.
If the PC is already operating on a network, specify its
original IP address in the
TCP/IP Properties dialog box
(before changing it to 192.168.0.9).
■ WJ-NT104 Setup
First, it is necessary to set an IP address for the WJ-NT104 according to the operating environment. Consult your network
administrator for the address to set.
If the PC is running Windows95 or Windows98, select
Control Panel / Network / Configuration , click the
[Properties] button to open the TCP/ IP Properties
dialog box, and enter the IP address. Refer to the set-
tings on page 13.
r Restart the PC.
t Start the PC’s browser.
Specify http://(IP address set in the WJ-NT104)/ in the
Location bar. The connection is established when the
image from the WJ-NT104 is displayed on the PC
screen.
Note: Refer page 14 for further details.
● IP Address Setting via RS-232C
Connection
For further information, refer to page 54.