Panasonic WJ-NT104 - Manual (Page 40)

40
SETUP PROCEDURES
■ How to Read ADMINISTRATOR SETUP PAGE
On the Location bar, type http://192.168.0.10/hwsetup.html to display the ADMINISTRATOR SETUP PAGE . To open the
ADMINISTRATOR SETUP PAGE , you need to enter your user ID and password. The default ID and password are
[admin] and [nil (none)], respectively.
q
w
e
r
t
y
u
i
o
!1
[SET][SUBMIT] button
Clicking this button stores the settings made on the
ADMINISTRATOR SETUP PAGE in the WJ-
NT104.
The setting range of this button is indicated by the
ruled line that separates one item from another.
The area showing the data within the range returns
to the original display when the button is clicked.
The system is not restarted when this button is
pressed.
[SET & REBOOT] button
Clicking this button stores the settings made on
this page in the WJ-NT104. Remember, however,
that any recorded alarm data will be deleted.
q MODE SETUP
To set the default page when a file name is specified.
Also set operation mode, image quality, and camera
control selection on this page.
w NETWORK
To select LAN/PPP and set the IP address, network,
and default gateway.
e ALARM
To set alarm input ON/OFF, alarm image save mode,
image overwrite YES/NO, number of images recorded,
frame rate, and parallel I/O port (See page 37).
r SERIAL PORT
To select RS-232C or RS-485 and set the communica-
tion parameters.
t MODEM
To set the modem or TA to be used in the PPP connec-
tion.
y USER
User authorization, user registration, user deletion.
To register or delete a user table.
u HOST
To set the address of the host that can be accessed
without user certification.
i FTP CLIENT
To set the FTP client.
o DATE/TIME
To set the internal clock of the device.
!0 CAMERA MENU
To set connected cameras (option) by remote control.
!1 RETURN TO MAIN PAGE
To return to the MAIN PAGE window.
!0