Alarms, Image quality, Maximum recording fields – Pelco DX3000 User Manual
Page 23: Image quality maximum recording fields
22
Pelco Manual C681M-D (2/02)
ALARMS
IMAGE QUALITY
Skip steps 1 and 2 if they have already been done.
1.
Press the SET UP button to display the Menu Setting menu.
2.
Turn the JOG dial to move the cursor to A-REC/M-DET SETTING, and then turn the
SHUTTLE ring to the right. The A-Rec/M-Det Setting menu appears.
3.
Check that the cursor is next to IMAGE QUALITY, and then turn the SHUTTLE ring to
the right. The option starts flashing.
NOTE:
If the PRE A-REC field in this menu has been set to SHORT, MEDIUM,
or LONG, the option does not flash because it cannot be changed.
4.
Turn the JOG dial to select the option, and then turn the SHUTTLE ring to the right.
The option stops flashing.
Turning the JOG dial switches the image quality options as follows:
BASIC, STANDARD, MEDIUM, HIGH, SUPERIOR
5.
Do one of the following:
•
Turn the JOG dial to go to another item in this menu.
•
Turn the SHUTTLE ring to the left to return to the Menu Setting menu to go to an-
other menu.
•
Press the SET UP button to exit the programming mode.
MAXIMUM RECORDING FIELDS
Skip steps 1 and 2 if they have already been done.
1.
Press the SET UP button to display the Menu Setting menu.
2.
Turn the JOG dial to move the cursor to A-REC/M-DET SETTING, and then turn the
SHUTTLE ring to the right. The A-Rec/M-Det Setting menu appears.
3.
Turn the JOG dial to move the cursor to MAX REC FIELDS, and then turn the
SHUTTLE ring to the right. The option starts flashing.
NOTE:
If the PRE A-REC field in this menu has been set to SHORT, MEDIUM,
or LONG, the option does not flash because it cannot be changed.
4.
Turn the JOG dial to select the maximum recording fields, and then turn the SHUTTLE
ring to the right. The option stops flashing.
Turning the JOG dial switches the maximum recording fields options as follows:
DX3009 Models –
1F, 3F, 5F, 7.5F, 15F, 30F
DX3016 Models –
1F, 3F, 5F, 6F, 7.5F, 10F, 15F, 30F
NOTE:
If the motion detection setting in the Initial Set Up menu is turned ON,
option 30F is not available on the DX3009 models, and options 6F, 10F, and 30F
are not available on the DX3016 models.
5.
Do one of the following:
•
Turn the JOG dial to go to another item in this menu.
•
Turn the SHUTTLE ring to the left to return to the Menu Setting menu to go to an-
other menu.
•
Press the SET UP button to exit the programming mode.