Pelco DX3000 - Manual (Page 53)

52 Pelco Manual C681M-D (2/02)
8. Do one of the following:
• Turn the JOG dial to go to another item in this menu.
• Turn the SHUTTLE ring to the left to return to the Menu Setting menu to go to
another menu.
• Press the SET UP button to exit the programming mode.
TIMER RECORDING
When using the timer to start recording, the Define P1-P3 screens can be used to set differ-
ent recording patterns.
Skip steps 1 and 2 if they have already been done.
1. Press the SET UP button to display the Menu Setting menu.
2. Turn the JOG dial to move the cursor to TIMER PROGRAM, and then turn the
SHUTTLE ring to the right. The Timer Program menu appears.
3. Check that the cursor is next to SELECTED PATTERN, and then turn the SHUTTLE
ring to the right. The option starts flashing.
4. Turn the JOG dial to the right to select the pattern (P1, P2, or P3) that will be used
during timer recording, and then turn the SHUTTLE ring to the right. The option stops
flashing.
5. Turn the JOG dial to move the cursor to DEFINE P1 (or P2 or P3), and then turn the
SHUTTLE ring to the right. The timer program appears.
6. Check that the cursor is on Program 1, and then turn the SHUTTLE ring to the right to
select the DW column.
7. Turn the JOG dial to select the day, and then turn the SHUTTLE ring to the right.
The cursor moves to the column for the starting time.
Settings for the DW column:
• The days of the week from Sunday to Saturday (SUN-SAT)
• DAY (to record at the same time every day)
• SPL (to record on the days displayed at the bottom of the screen)
NOTE: Turning the SHUTTLE ring to the left moves the cursor to the previous entry.
8. Use the JOG dial to select the hour, and then turn the SHUTTLE ring to the right.
The cursor moves to the 10-minute digit.
Time is displayed in 24-hour format.
9. Use the JOG dial to select the 10-minute time, and then turn the SHUTTLE ring to the
right. The cursor moves to the minute digit.
10. Use the JOG dial to select the minute, and then turn the SHUTTLE ring to the right.
The cursor moves to the column for the ending time.
-
<TIMER PROGRAM> P1
DW START END MODE
1 ––– ––:–– ––:–– ––––––
2 ––– ––:–– ––:–– ––––––
3 ––– ––:–– ––:–– ––––––
4 ––– ––:–– ––:–– ––––––
5 ––– ––:–– ––:–– ––––––
6 ––– ––:–– ––:–– ––––––
7 ––– ––:–– ––:–– ––––––
8 ––– ––:–– ––:–– ––––––
SPECIAL DW:SUN–SAT