Split 16 screen setting (dx3016 models only), Image quality – Pelco DX3000 User Manual
Page 42
Pelco Manual C681M-D (2/02)
41
SPLIT 16 SCREEN SETTING (DX3016 Models Only)
Skip steps 1 and 2 if they have already been done.
1.
Press the SET UP button to display the Menu Setting menu.
2.
Turn the JOG dial to move the cursor next to MPX DISPLAY, and then turn the
SHUTTLE ring to the right. The MPX Display menu appears.
3.
Turn the JOG dial to move the cursor next to SPLIT 16 SCREEN SETTING, and then
turn the SHUTTLE ring to the right. The Split16 Screen Setting menu appears.
4.
Make sure the cursor is next to SPLIT16, and then turn the SHUTTLE ring to the right.
The top left number starts flashing.
5.
Turn the JOG dial to display the desired camera number, and then turn the SHUTTLE
ring to the right. The next camera number starts flashing. If you do not want to change
the camera number, just turn the SHUTTLE ring to the right.
6.
Repeat step 5 for the other 15 cameras. You cannot use the same camera number
more than once.
7.
Turn the SHUTTLE ring to the left once to return to the MPX Display menu or twice to
return to the Menu Setting Menu, or press the SET UP button to exit the programming
mode.
IMAGE QUALITY
It is possible to set the image quality when viewing multiple cameras.
Skip steps 1 and 2 if they have already been done.
1.
Press the SET UP button to display the Menu Setting menu.
2.
Turn the JOG dial to move the cursor to MPX DISPLAY, and then turn the SHUTTLE
ring to the right. The MPX Display menu appears.
3.
Turn the JOG dial to move the cursor to IMAGE QUALITY, and then turn the SHUTTLE
ring to the right. The option flashes.
HIGH:
Fine details are visible.
NO FLICKER:
Screen flicker is reduced. Vertical resolution may be slightly degraded.
4.
Turn the JOG dial to choose the option, and then turn the SHUTTLE ring to the right.
The option stops flashing.
5.
Do one of the following:
•
Turn the JOG dial to go to another item in this menu.
•
Turn the SHUTTLE ring to the left to return to the Menu Setting menu to go to an-
other menu.
•
Press the SET UP button to exit the programming mode.