Frame-by-frame (still frame) playback, Pause playback, Reverse playback – Pelco DX3000 User Manual

Page 63: Adjusting playback speed, Regular playback mode

Advertising
background image

62

Pelco Manual C681M-D (2/02)

FRAME-BY-FRAME (STILL FRAME) PLAYBACK

1.

Press the PAUSE button during playback. The unit shifts into still-frame mode.

2.

If the screen shows more than one camera, you can view a full-screen view of a single
camera by pressing the CAMERA button for that camera.

3.

Turn the JOG dial in either direction during still-frame playback.

Turn the JOG dial one stop to the right to move forward one frame and one stop to the
left to move back one frame. Continue turning the JOG dial to the right for forward
playback of consecutive frames and to the left for reverse playback of consecutive
frames. Stop turning the dial for still-frame viewing.

The PLAY button lights when moving in the forward direction, and the REV PLAY but-
ton lights when moving in the reverse direction.

If you switch directions, the first stop reverses the direction, as indicated by the lights
changing on the PLAY and REV PLAY buttons, but the video does not move. When
you turn the JOG dial to the next stop, the video moves forward or backward one
frame.

4.

Press the PAUSE button again to resume playback in the forward or reverse direction,
depending on whether the PLAY or REV PLAY button is lit. Or, press the PLAY or REV
PLAY button to exit the pause mode and resume playback in the desired direction.

PAUSE PLAYBACK

1.

Press the PAUSE button to pause playback.

2.

Press the PAUSE button again to resume playback.

REVERSE PLAYBACK

Press the REV PLAY button when the unit is not in operation. The unit begins reverse playback.

On the first reverse playback after the power switch is turned on or after recording, the unit
starts by displaying the last recorded image.

ADJUSTING PLAYBACK SPEED

The SHUTTLE ring can be used to adjust the playback speed. Playback speed will vary ac-
cording to how far the SHUTTLE ring is turned.

Regular Playback Mode

1.

Turn the SHUTTLE ring to the desired playback speed while the recorder is in play-
back or reverse playback.

When playing back images recorded at different recording intervals, there may be rare
occasions when the playback speed differs from the original recording rate.

2.

The unit shifts to regular playback mode when the SHUTTLE ring is returned to the
center position.

01139

Advertising