Tcp/ip setting (dx3016 models only), Time and date display, Display mode – Pelco DX3000 User Manual
Page 50
Advertising
Pelco Manual C681M-D (2/02)
49
TCP/IP SETTING (DX3016 Models Only)
This menu is not used.
TIME AND DATE DISPLAY
DISPLAY MODE
Skip steps 1 and 2 if they have already been done.
1.
Press the SET UP button to display the Menu Setting menu.
2.
Make sure the cursor is next to TIME DATE DISPLAY, and then turn the SHUTTLE
ring to the right. The Time Date Display menu appears.
3.
Make sure the cursor is next to DISPLAY MODE, and then turn the SHUTTLE ring to
the right. The current option starts flashing.
Advertising