Psion Teklogix 9160 G2 User Manual
Page 22
Approvals And Safety Summary
xviii
Psion Teklogix 9160 G2 Wireless Gateway User Manual
•
Do not operate the 9160 G2 if it has received a sharp blow, been dropped, or
otherwise damaged in any way; it should be inspected by qualified service per-
sonnel.
•
Do not disassemble the 9160 G2; it should be repaired by qualified service
personnel. Incorrect reassembly may result in electric shock or fire.
•
To reduce risk of electric shock, unplug the 9160 G2 from the outlet before
attempting any maintenance or cleaning.
•
An extension cord should not be used unless absolutely necessary. Use of
an improper extension cord could result in fire or electric shock. If an exten-
sion cord must be used, make sure:
•
The plug pins on the extension cord are the same number, size, and
shape as those on the adaptor.
•
The extension cord is properly wired, in good electrical condition, and
that the wire size is larger than 16 AWG.
•
The 9160 G2 is designed for indoor use only; do not expose the 9160 G2 to rain or
snow.
D
O
N
OT
O
PERATE
I
N
A
N
E
XPLOSIVE
A
TMOSPHERE
Operating Psion Teklogix equipment where explosive gas is present may
result in an explosion.
D
O
N
OT
R
EMOVE
C
OVERS
O
R
O
PEN
E
NCLOSURES
To avoid injury, the equipment covers and enclosures should only be
removed by qualified service personnel. Do not operate the equipment
without the covers and enclosures properly installed.
D
O
N
OT
H
OLD
A
NTENNA
To avoid discomfort due to the local heating effect of radio frequency
energy, do not touch the antenna when a 9160 G2 is transmitting.
C
ONNECTION
TO
O
UTDOOR
A
NTENNA
The outdoor antenna shall only be installed by Psion Teklogix
service professionals.