Psion Teklogix 9160 G2 - Manual (Page 71)

Psion Teklogix 9160 G2 Wireless Gateway User Manual 49
Chapter 5: Configuring Basic Settings
Provide Network Settings
5.3 Provide Network Settings
Note: The 9160 G2 Wireless Gateway is not designed for multiple, simultaneous configuration
changes. If you have a network that includes multiple access points, and more than one
administrator is logged on to the Administration Web pages and making changes to the
configuration, all access points in the cluster will stay in sync, but there is no guarantee
that all configuration changes specified by multiple users will be applied.
Field Description
Current Password Enter the current administrator password. You must correctly enter the current password
before you are able to change it.
New Password Enter a new administrator password. The characters you enter will be displayed as “ * ” char-
acters to prevent others from seeing your password as you type.
The Administrator password must be an alphanumeric string of up to 8 characters. Do not use
special characters or spaces.
As an immediate first step in securing your wireless network, we recommend that
you change the administrator password from the default.
Confirm New Password Re-enter the new administrator password to confirm that you typed it as intended.
Network Name (SSID) Enter a name for the wireless network as a character string. This name will apply to all access
points on this network. As you add more access points, they will share this SSID.
The Service Set Identifier (SSID) is an alphanumeric string of up to 32 characters
Note: If you are connected as a wireless client to the same AP that you are admin-
istering, resetting the SSID will cause you to lose connectivity to the AP. You
will need to reconnect to the new SSID after you save this new setting.
Table 5.2 Administrator Password And Wireless Network