Psion Teklogix 9160 G2 User Manual
Page 26
Chapter 1: Introduction
About This Manual
4
Psion Teklogix 9160 G2 Wireless Gateway User Manual
Chapter 10: Configuring Security
provides a number of authentication and encryption schemes to ensure that your
wireless infrastructure is accessed only by the intended users. The details of
each security mode are described.
Chapter 11: Maintenance And Monitoring
describes the maintenance and monitoring tasks for individual access points
(not for cluster configurations).
Chapter 12: The Ethernet (Wired) Interface
describes how to configure the wired interface settings on the 9160 G2
Wireless Gateway.
Chapter 13: Setting the Wireless Interface
describes how to configure the wireless address and related settings on the
9160 G2 Wireless Gateway.
Chapter 14: Setting up Guest Access
allows you to configure the 9160 G2 Wireless Gateway for controlled guest
access to an isolated network.
describes how to configure multiple wireless networks on Virtual LANs (VLANs).
Chapter 16: Configuring 802.11 Radio Settings
describes how to configure Radio Settings on the 9160 G2 Wireless Gateway
Chapter 17: MAC Address Filtering
instructs how you can use MAC address filtering to control client access to your
wireless network.
describes how to configure Load Balancing on your wireless network, to allow
you to balance the distribution of wireless client connections across multiple
access points.
Chapter 19: Quality of Service (QoS)
provides instructions on configuring the parameters on multiple queues to
improve the throughput and performance of differentiated wireless traffic.
Chapter 20: Wireless Distribution System
describes how to configure the Wireless Distribution System (WDS) on the
9160 G2 Wireless Gateway, enabling you to connect multiple access points
which can then communicate with one another wirelessly in a standardized way.