1 update, 2 verifying the firmware upgrade – Psion Teklogix 9160 G2 User Manual
Page 279
Psion Teklogix 9160 G2 Wireless Gateway User Manual
257
Chapter 24: Backing Up & Restoring Configuration
Update
24.6.1 Update
1.
Click Update to apply the new firmware image.
Upon clicking Update for the firmware upgrade, a popup confirmation
window is displayed that describes the upgrade process.
2.
Click OK to confirm the upgrade, and start the process
Important:
The firmware upgrade process begins once you click Update and
then OK in the popup confirmation window.
The upgrade process may take several minutes during which time
the access point will be unavailable. Do not power down the
access point while the upgrade is in process. When the upgrade is
complete, the access point will restart and resume normal opera-
tion using the factory default configuration settings.
24.6.2 Verifying The Firmware Upgrade
To verify that the firmware upgrade completed successfully, check the firmware
version shown on the Upgrade tab (and also on the Basic Settings tab). If the
upgrade was successful, the updated version name or number will be indicated.