Broadcast, Bss ) – Psion Teklogix 9160 G2 User Manual
Page 343
Psion Teklogix 9160 G2 Wireless Gateway User Manual
E-7
Appendix E: Glossary
Bridge
•
The Capability Information lists requirements of stations that want to join
the WLAN. For example, it indicates that all stations must use WEP.
•
The Service Set Identifier (SSID).
•
The Basic Rate Set is a bitmap that lists the rates that the WLAN supports.
•
The optional Parameter Sets indicates features of the specific signalling
methods in use (such as frequency hopping spread spectrum, direct
sequence spread spectrum, etc.).
•
The optional Traffic Indication Map (TIM) identifies stations, using power
saving mode, that have data frames queued for them.
Bridge
A connection between two local area networks (LANs) using the same protocol,
such as Ethernet or IEEE 802.1x.
Broadcast
A Broadcast sends the same message at the same time to everyone. In wireless
networks, broadcast usually refers to an interaction in which the access point sends
data traffic in the form of IEEE 802.1x Frames to all client stations on the network.
Some wireless security modes distinguish between how unicast, multicast, and
broadcast frames are encrypted or whether they are encrypted.
See also Unicast and Multicast.
Broadcast Address
See IP Address.
BSS
A basic service set (BSS) is an Infrastructure Mode Wireless Networking
Framework with a single access point. Also see extended service set (ESS) and
independent basic service set (IBSS).