Psion Teklogix 9160 G2 - Manual (Page 72)

Chapter 5: Configuring Basic Settings
Update Basic Settings
50 Psion Teklogix 9160 G2 Wireless Gateway User Manual
5.4 Update Basic Settings
When you have reviewed the new configuration, click Update to apply the settings
and deploy the access points as a wireless network.
5.5 Summary Of Settings
When you update the Basic Settings, a summary of the new settings is shown, along
with information about next steps.
At initial startup, no security is in place on the access point. An important next step
is to configure security, as described in Chapter 10: “Configuring Security”.
At this point if you click Basic Settings again, the summary of settings page is
replaced by the standard Basic Settings configuration options.