Psion Teklogix 9160 G2 User Manual
Page 27
Psion Teklogix 9160 G2 Wireless Gateway User Manual
5
Chapter 1: Introduction
About This Manual
describes how to configure SNMP and related settings on the 9160 G2 Wireless
Gateway Enterprise-Manager API.
Chapter 22: The 9160 G2 As Base Station
describes how to configure the 9160 G2 Wireless Gateway as either a wired or
wireless Base Station, or as a Remote Radio Module (RRM). This chapter also
describes narrow band radio configuration settings.
Chapter 23: Network Time Protocol Server
describes how to configure the 9160 G2 Wireless Gateway to use a specified
Network Time Protocol (NTP) server to synchronize computer clock times on
your network.
Chapter 24: Backing Up & Restoring Configuration
shows how to backup a configuration file that can be used at a later date to
restore the access point to the previously saved configuration.
details the physical, environmental, and various operating specifications for the
9160 G2 Wireless Gateway and its radios.
Appendix A: Support Services And Worldwide Offices
presents information for technical support, contacts, and the Psion Teklogix
worldwide web address.
Appendix B: Port Pinouts And Cable Diagrams
includes pinouts and diagrams of the ports and cables for the 9160 G2.
Appendix C: Security Settings On Wireless Clients And RADIUS Server Setup
details how to configure security settings on the client to match the security
mode being used by each network (AP) connection.
describes how to solve common problems possibly encountered while updating
network configurations on networks served by multiple, clustered access points.
provides definitions and further details on terms featured in bold italics through-
out the manual.