Perle Systems IOLAN SCS - Manual (Page 142)

Serial Port Profiles
142 IOLAN SDS/SCS/STS User’s Guide, Version 3.6
SSH Settings
The SSH settings apply when the User Service is set to SSH or the Terminal profile specifies an
SSH connection to a host.
Configure the following parameters:
Terminal Type Type of terminal attached to this serial port; for example, ANSI or WYSE60.
Verbose Mode When enabled, displays debug messages on the terminal.
Default: Disabled
Enable
Compression When enabled, requests compression of all data. Compression is desirable on
modem lines and other slow connections, but will only slow down things on
fast networks.
Default: Disabled
Auto Login When enabled, creates an automatic SSH login, using the Name and Password
values.
Default: Disabled
Name The name of the user logging into the SSH session.
Field Format: Up to 20 alphanumeric characters, excluding spaces
Password The user’s password when Auto Login is enabled.
Field Format: Up to 20 alphanumeric characters, excluding spaces
SSH1 When enabled, selects an SSH version 1 connection.
Default: Enabled
SSH1 Cipher Select the encryption method (cipher) that you want to use for your SSH
version 1 connection:
Data Options:
z 3DES
z Blowfish
Default: 3DES
SSH2 When enabled, selects an SSH version 2 connection. If both SSH 1 and SSH 2
are selected, the IOLAN will attempt to make an SSH 2 connection first. If that
connection fails, it will attempt to connect to the specified host using SSH 1.
Default: Enabled