Route list, Overview functionality field descriptions – Perle Systems IOLAN SCS User Manual
Page 90
Advanced
90
IOLAN SDS/SCS/STS User’s Guide, Version 3.6
Route List
Overview
Entering routes in the routing list enables the identification of gateways to be used for accessing
specific hosts or external networks from the IOLAN's local network.
Functionality
There are three types of routes:
z
Default—A route that provides general access beyond your local network.
z
Host—A route defined for accessing a specific host external to your local network.
z
Network—A route defined for accessing a specific network external to your local network.
You can specify up to 20 routes on desktop IOLAN models; you can specify up to 49 routes on rack
mount IOLAN models.
Two types or gateways (method of accessing specific hosts or external networks) can be configured:
z
Host—Specify a specify host that will provide access to the route destination.
z
Interface—Specify the IPv6 tunnel, Remote Access (PPP)-defined serial port, or Remote Access
(SLIP)-defined serial port that will provide access to the route destination.
Field Descriptions
The following buttons are available on this window:
Add Button
Adds a route to the Route List.
Edit Button
Changes an existing route in the Route List.
Delete Button
Deletes a route from the Route List.