Perle Systems IOLAN SCS - Manual (Page 293)

293
Management
Internet Address The IP address of the SNMP manager that will send requests to the IOLAN. If
the address is
0.0.0.0 , any SNMP manager with the Community name can
access the IOLAN. If you specify a network address, for example
172.16.0.0 , any SNMP manager within the local network with the
Community name can access the IOLAN.
Field Format: IPv4 or IPv6 address
Permissions Permits the IOLAN to respond to SNMP requests.
Data Options:
z None—There is no response to requests from SNMP.
z Readonly—Responds only to Read requests from SNMP.
z Readwrite—Responds to both Read and Write requests from SNMP.
Default: None
V3 Read-Write
User Specified user can view and edit SNMP variables.
V3 Read-Write
Security Level Select the security level for the Read-Writer user. This must match the
configuration set up in the SNMP manager.
Data Options:
z None—No security is used.
z Auth—User authentication is used.
z Auth/Priv—User authentication and privacy (encryption) settings are
used.
Default: None
V3
V3 Read-Write
Auth Algorithm Specify the authentication algorithm that will be used for the read-write user.
Data Options: MD5, SHA
Default: MD5
V3 Read-Write
Auth Password Type in the read-write user’s authentication password.
V3 Read-Write
Confirm Password Retype the user’s authentication password.
V3 Read-Write
Privacy Algorithm Specify the read-write user’s privacy algorithm (encryption).
Data Options: DES, AES
Default: DES
V3 Read-Write
Privacy Password Type in the read-write user’s privacy password.
V3 Read-Write
Confirm Password Retype the privacy password.
V3 Read-Only User Specified user can only view SNMP variables.
V3 Read-Only
Security Level Select the security level for the Read-Only user. This must match the
configuration set up in the SNMP manager.
Data Options:
z None—No security is used.
z Auth—User authentication is used.
z Auth/Priv—User authentication and privacy (encryption) settings are
used.
Default: None