Perle Systems IOLAN SCS - Manual (Page 337)

RADIUS and TACACS+ 337
RADIUS
16 Login-TCP-Port Indicates the TCP port with which the user is to be
connected when the Service-Type is set to
1 (Login)
or 3 (Callback-Login).
19 Callback-Number Specifies the callback phone number. This is the
same implementation as
20 (Callback-ID), but
takes precedence if 20 is set.
20 Callback-ID Specifies the callback phone number. This is the
same implementation as
19 (Callback-Number), but
19 takes precedence if both are set.
26 Vendor-Specific Perle’s defined attributes for line access rights and
user level. See
Perle RADIUS Dictionary Example
on page 340 for an example of this file.
Line Access Rights for port n (where n is the line
number):
Name: Perle-Line-Access-Port- n
Type: 100 + n
Data Type: Integer
Value: Disabled (0), ReadWrite(1), ReadInput(2),
ReadInputWrite (3), ReadOutput (4),
ReadOutputWrite (5), ReadOutputInput (6),
ReadOutputInputWrite (7)
Name: Perle-User-Level
Type: 100
Data Type: Integer
Value: Admin(1), Normal(2), Restricted(3),
Menu(4)
Name: Perle-Clustered-Port-Access
Type: 99
Data Type: Integer
Value: Disabled(0), Enabled(1)
27 Session-Timeout Maximum number of seconds the user will be
allowed to stay logged on.
28 Idle-Timeout Use this timer to close a connection because of
inactivity. When the Idle-Timeout expires, the
IOLAN will end the connection. The maximum
value is 4294967 seconds (about 49 days). A value
of 0 (zero) means the Idle-Timeout will not expire,
so the connection is permanently open.
96 Framed-Interface-Id The remote IPv6 interface identifier for the remote
end of the PPP link.
Type Name Description