Perle Systems IOLAN SCS User Manual
Page 380
Installing a Perle PCI Card
380
IOLAN SDS/SCS/STS User’s Guide, Version 3.6
2.
Unscrew the four screws along the bottom of the serial side of the SCS IOLAN. On the SCS
8-port/16-port/32-port models, this includes the screw that is at the bottom of the PCI face plate.
3.
Slide the top of the IOLAN off of the chassis.
4.
Carefully holding the bracket just behind the face plate, unscrew the two screws at the top of the
8-port/16-port/32-port removable face plate or the two side screws of the 48-port removable face
plate of the piece you just took off.
The 8-port/16-port/32-port models are displayed below with the face plate and bracket taken
apart.
5.
Unscrew the screw in the bracket. The 8-port/16-port/32-port bracket is shown below.
6.
Slide the PCI adapter card into the bracket.
32-port model
48-port model
32-port model
48-port model